Sitecom DC-228 Bedienungsanleitung

DC-228 ADSL2+ Modem/Router -Annex A- User Manual Version: 1.0

7 Bringing up the DC-228 Connect the supplied power-adapter to the power inlet port and connect it to a wall outlet. The DC-228 automatically

4. Type user name and password (default is admin/admin). 4. Click OK. 5. You will see the home page of the DC-228. The System status secti

LAN settings The LAN tab gives you the opportunity to change the IP settings of the DC-228. Click <Apply> at the bottom of this scr

IP Address Pool You can select a particular IP address range for your DHCP server to issue IP addresses to your LAN Clients. Note: defa

Device Status View the Broadband modem/router’s current configuration settings. Device Status displays the configuration settings you’ve co

Internet Status This page displays whether the ADSL port is connected to an ADSL service provider. It also displays the router’s W

ADSL Status This page shows the current operation mode, status of your ADSL connection, the data rate and the quality of your ADSL link. Operation

DHCP Client Status DHCP This page shows all DHCP clients (LAN PCs) currently connected to your network. The table shows the assigned

DC-228 Log View the operation log of the DC-228. This page shows the current system log of the Broadband modem/router. It displays any event

9 Configuration Wizard Click Wizard to configure the modem. The Setup wizard will now be displayed; check that the adsl line is connected and cl

2 TABLE OF CONTENTS 1 PACKAGE CONTENTS ...

10 Firewall Settings The Broadband router provides extensive firewall protection by restricting connection parameters, thus limiting th

DMZ If you have a client PC that cannot run an Internet application (e.g. Games) properly from behind the NAT firewall, then you can open

Denial of Service (DoS) The Broadband router's firewall can block common hacker attacks, including Denial of Service, Ping of Death,

Access You can restrict users from accessing certain Internet applications/services (e.g. Internet websites, email, FTP etc.). Access Cont

Filter client PC by MAC Check “Enable MAC Filtering” to enable MAC Filtering. Add PC Fill in “Client PC MAC Address” and “Commen

URL block You can block access to some Web sites from particular PCs by entering a full URL address or just keywords of the Web site. Enable UR

11 Advanced Settings Network Address Translation (NAT) allows multiple users at your local site to access the Internet through a single Publ

Virtual server Use the Virtual Server function when you want different servers/clients in your LAN to handle different service/Inte

Add Virtual Server Fill in the "Private IP", "Private Port", "Type", “Public Port” and "Comment"

Special application Some applications require multiple connections, such as Internet games, video Conferencing, Internet telephony and

1 Package Contents Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the

This will automatically list the Public Ports required for this popular application in the location (1-10) you specified. Add Special Application

UPNP With UPnP, all PCs in you Intranet will discover this router automatically. So, you don’t have to configure your PC and it can ea

QoS QoS can let you classify Internet application traffic by source/destination IP address and port number. You can assign priority for ea

Edit a QoS rule Select the rule you want to edit and click “Edit”, then enter the detail form of the QoS rule. Click “Apply” after editing the form a

Routing These screens define routing related parameters, including static routes and RIP (Routing Information Protocol) parameters. Routing Table

SNMP Use the SNMP configuration screen to display and modify parameters for the Simple Network Management Protocol (SNMP). SNMP operation mode To

Trap Specify the IP address of the NMS to notify when a significant event is detected by the agent. When a trap condition occurs, the SNMP agent se

12 TOOLBOX Settings Password change options You can change the password required to log into the broadband router's system web-

Time Zone The Time Zone allows your router to base its time on the settings configured here, which will affect functions such as Log entries and F

Remote Management The remote management function allows you to designate a host in the Internet the ability to configure the Broad

2 Product Layout Port Description ADSL Connect your telephone/ADSL cable this port LAN Connect the cable from your PC or network to th

Firmware Upgrade This page allows you to upgrade the router’s firmware. Firmware Upgrade This tool allows you to upgrade the Broadband

Backup Settings The Backup screen allows you to save (Backup) the router’s current configuration settings. When you save the configurati

Reset You can reset the router’s system should any problem exist. The reset function essentially re-boots your router’s system.

DDNS DDNS allows you to map the static domain name to a dynamic IP address. You must get an account, password and your static

Front panel The front panel describes the corresponding LED indications and port functionality. LED Description POWER (Orange) Lights up when powe

3 Network + System Requirements To begin using the DC-228, make sure you meet the following as minimum requirements: • PC/Notebook. •

5 Setup LAN, WAN LAN / computer connections ADSL connection

6 PC Network Adapter setup (Windows XP) • Enter [Start Menu]  select [Control panel]  select [Network]. • Select [Local Area Connection]) icon

• Select [Internet Protocol (TCP/IP)] =>Click [Properties]. • Select the [General] tab. a. DC-228 supports [DHCP] function, please se