Sitecom WL-613 Bedienungsanleitung PDF herunterladen (Seite 51)

are controlled by community strings. To communicate with the Router, the NMS

must first submit a valid community string for authentication.

Note: Up to five community names may be entered.

Trap Specify the IP address of the NMS to notify when a significant event is

detected by the agent. When a trap condition occurs, the SNMP agent sends an

SNMP trap message to any NMS specified as a trap receiver.

IP Address Traps are sent to this address when errors or specific events occur

on the network.

Community A community string (password) specified for trap management.

Enter a word, something other than public or private, to prevent unauthorized

individuals from accessing information on your system.

Version Sets the trap status to disabled, or enabled with V1 or V2c. The v2c

protocol was proposed in late 1995 and includes enhancements to v1 that are

universally accepted. These include a get-bulk command to reduce network

management traffic when retrieving a sequence of MIB variables, and a more

elaborate set of error codes for improved reporting to a Network Management

Station.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58

Keine Kommentare

Sitecom WL-613 Bedienungsanleitung Seite 51