Sitecom WLR-4004 Bedienungsanleitung

WLR-4004 User Manual

Setup your Router You can place the router on a desk or other flat surface, or you can mount it on a wall. For optimal performance, place your rout

Setup your Computer Windows, Manual Connection Click on the icon for wireless connectivity. This is usually located in the System Tray, next to t

Windows, OPS Connection Click on the icon for wireless connectivity. This is usually located in the System Tray, next to the clock. Select the

Mac OSX Click on the icon for wireless connectivity. This is usually located in the System Tray, next to the clock. Select the Sitecom network.

Login to your Router LOGIN procedure • OPEN your browser (e.g. Internet Explorer). • Type http://sitecom.router in the address bar

Configure your Internet connection From the menu, select “Internet Settings”. Depending on the chosen setting, you may need to enter your user nam

IPv6 Configuration The IPv6 (Internet Protocol version 6) section is where you configure your IPv6 Connection type. IPv6 Connection Type There are

6RD Mode In the 6RD mode, no additional configuration is necessary. Link-local Mode The Link-local address is used by nodes and routers when comm

Configure your Router Status The System status section allows you to monitor the current status of your router, the UP time, hardware information a

• IP address 192.168.0.1: It is the router‟s LAN IP address (Your LAN clients default gateway IP address). • IP Subnet Mask 255.255.255.0: Specify

Table of Contents Introduction ... 3 Package

DHCP Client Status This page shows all DHCP clients (LAN PCs) currently connected to your network. The table shows the assigned IP address, MAC add

Statistics Shows the counters of packets sent and received on WAN, LAN & WLAN.

Wireless Settings You can set parameters that are used for the wireless stations to connect to this router. The parameters include Mode, ESSID, Cha

• SSID: This is the name of the wireless signal which is broadcasted. All the devices in the same wireless LAN should have the same SSID. • Channe

• Authentication Type: There are two authentication types: "Open System" and "Shared Key". When you select "Open System&q

throughput of the AP will be a little lower due to a lot of frame-network that is transmitted. • TX Power: The transmit power can be set to a bare

IEEE 802.1x is an authentication protocol. Every user must use a valid account to login to this Access Point before accessing the wireless LAN. The

Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a pre-shared key to authenticate wireless stations and encrypt data duri

This wireless router supports MAC Address Control, which prevents unauthorized clients from accessing your wireless network. • Enable wireless acc

want to use the PIN code, you have to know the PIN code of the wireless client and switch it to WPS mode, then fill-in the PIN code of the wireless

Introduction Congratulations on your purchase of the WiFi Router X4 N300. This router is compliant with 802.11n and up to 6 times faster than stand

Firewall Settings The router provides extensive firewall protection by restricting connection parameters, thus limiting the risk of hacker attacks,

Enable DMZ: Enable/disable DMZ Public IP Address: The IP address of the WAN port or any other Public IP addresses given to you by your ISP Cl

Ping of Death: Protection from Ping of Death attacks Discard Ping From WAN: The router‟s WAN port will not respond to any Ping requests Port S

Remove PC: If you want to remove some PC from the "MAC Filtering Table", select the PC you want to remove in the table and then click &q

Advanced Settings Network Address Translation (NAT) allows multiple users at your local site to access the Internet through a single Public IP Addr

Enable Port Forwarding: Enable Port Forwarding Local IP: This is the private IP of the server behind the NAT firewall. Type: This is the proto

Type: Select the port number protocol type (TCP, UDP or both). If you are unsure, then leave it to the default “both” setting. Public Port Enter t

Popular applications: This section lists the more popular applications that require multiple connections. Select an application from the Popular A

for it. The packets of applications with higher priority will always go first. Lower priority applications will get bandwidth after higher priority

Toolbox Settings Password You can change the password required to log into the router's system web-based management. Passwords can contain 0 t

Key Features Features Advantages Incredible Data Rate up to 300Mbps* Heavy data payloads such as MPEG video streaming IEEE 802.11n Compliant and ba

Time Server Address: You can set an NTP server address. Enable Daylight Savings: The router can also take Daylight savings into account. If you

Enable automatic firmware update: When enabled the router will periodically check if a new firmware is available. If a new firmware is detected the

Reset You can reset the router‟s system should any problem exist. The reset function essentially re-boots your router‟s system. DDNS DDNS allows yo

Addendum A: Declaration of Conformity

Package Contents Open the package carefully, and make sure that none of the items listed below are missing. Do not discard the packing materials, i

Cautions This router‟s design and manufacturer has your safety in mind. In order to safely and effectively use this router, please read the followi

Product Layout Port Description Power connector Connect the 12V DC adapter to this port LAN (Yellow) Connect your PCs or network devices to these

LED Definition As shown from the top to the bottom. Port Description OPS (White) Shows OPS activity. Power (Red) Shows the device is turned on. 2.4

Network + System Requirements To begin using the router, make sure you meet the following as minimum requirements: PC/Notebook. Operating Syste