Wireless Network IP-Camera 150N WL-405 Full Manual

When the Admin-utility is installed, it can be found in the start-menu, via “START > Programs > Internet Camera > IPCam Admin Utility”

2.2 Viewer Utility The IP camera surveillance software provides various functions like video recording, after this software is installed, you c

2.2.1 Using the Viewer utility You can click ‘IPCam Surveillance Software’ icon from desktop, quick launch bar, or start menu to start the IP

Scan Click this button and the IP camera surveillance software will switch displaying the image of all connected camera automatically. Click this bu

Note: If you’re prompted by a windows security alert which asks you if you want to block ‘IPCamViewer’ program, please click ‘Unblock’ button, or

configuration fields. Refresh Rescan all cameras on your local network. If you didn’t see the camera you expected in ‘Camera Search’ box, or a new ca

2.2.2.2 Schedule Recording In this tab, you can setup scheduled video recording, so you can record the video captured by all cameras you have by a pr

Please note you must set a schedule that will be happened in the future, you can not set a schedule in the past. Edit You can modify a scheduled reco

2.2.2.3 Motion Recording With this function activated, only motions captured by the camera will be recorded, so you don’t have to waste hard disk sto

2.2.3 General Options You can set system-wide settings of this IP camera surveillance software in this menu. 2.2.3.1 'General Tab' Al

Table of Contents 1. Introduction ...3 Overview ...

2.2.3.2 'E-Mail Settings tab' If you want to use motion detection function and wish to get an email that contains the image captured by th

SMTP Auth Select ‘Enable’ if your SMTP server requires authentication, select ‘Disable’ if it’s not required. If you don’t know if your SMTP server r

Item Description Enable Requires password authentication when this software starts. Disable Password authentication is not required when this softw

2.2.4 Change Display Layout This IP camera surveillance software provides 8 kinds of display layout: Every layout displays different number of

Layout style 8: 16 Cameras Displays the video of up to 16 cameras. 2.2.5 Full-screen mode If you want to use all available spaces on your m

2.2.6 Scan If you have more than one camera configured, and you wish to switch the displaying image between cameras, you can click ‘Scan’ button to

2.2.7 Zoom-in / Zoom-out For cameras that support zoom-in / zoom-out function, you can use this function to see more objects that fall in the scope

2.2.8 Snapshot You can take a snapshot of selected camera and save it to ‘Snapshot’ sub-folder of pre-defined data directory. Click the sna

2.2.10 Video Playback You can playback all recorded video by clicking this button. A new window will appear: You have to search the vid

Locate the IP Address of this IP Camera Connect your IP Cam by cable on your router open the admin utility, and click on the “Scan button” You wil

1. Introduction Overview Thank you for purchasing this Internet IP camera! This IP camera is an ideal product for all kinds of video-survei

Log On to Web Management Interface Make sure the IP camera is correctly powered (Power LED is on), and then launch your browser and type the IP

Press ‘Next’ to start installation; press ‘Next’ button when you’re prompted, until installation is complete.

3. Using Web Management Interface 3.1 Camera Settings The first menu after you logged onto web management interface is ‘Status’, and on this pag

3.1.1 About This function will provide you with the version number of current IP camera plugin, which is useful when you need online support. To s

3.2 Status This menu provides all information about this IP camera, like firmware version, system uptime, date / time, and network information. Yo

3.3 Log All activities of this IP camera will be logged, and you and enter ‘Log’ menu to view these logs. You can access this menu by clicking ‘Lo

3.4 Video Setup You can specify the video and audio parameters of this IP camera here. 3.4.1 Dual Mode This IP camera supports two video encod

VBR: Video bit rate is variable based on the video content being transferred. There’re 5 levels of setting from ‘Lowest’ to ‘Highest’. Select ‘Lowest’

3.6 Motion Detection 3.6.1 Basic Settings The motion detection function makes this IP camera become your non-stop guard. You don’t have to was

storage spaces on Email and / or FTP server. Mail snapshot Select ‘Yes’ to send a picture to the Email address you specified in ‘E-Mail & FTP’ me

Physical Details Front - Network Camera Antenna Wireless network antenna Link LED Indicates LAN / Wi-Fi activity Power LED Indicates sys

The descriptions of every setting in motion detection menu will be given below: Item Description Region1 / Region2 / Region3 Check the box to enable

3.7 Network Setup All network-related settings can be found in this menu, and you have to specify TCP/IP parameters in this menu if you want to cha

For example, if the HTTP port number you specified here is 90 and the IP address of IP camera is 10.20.20.30, then you have to input ‘http://10.20.20

The descriptions of every setting in this menu will be given below: Item Description Enable DDNS Select ‘Enable’ to activate Dynamic DNS function o

Click the message to open ‘My Network Places’, and you’ll see the IP camera: You can double-click the icon to launch Internet Explorer and log on

3.8 Wireless Settings If you wish to use wireless network instead of wired network connection, you have to set the wireless LAN parameters here. Y

You can set to ‘Adhoc’ when you don’t have any wireless access point, but your computer has wireless network card. Set to ‘Infrastructure’ when you ha

must be the same with the wireless access point you selected. When you select a wireless access point from the list, it’s authentication type will be

3.9 FTP and E-Mail Settings This IP camera is capable to send an Email or perform FTP upload with captured image, when a motion is detected. This i

SSL If SSL encryption is required to connect to the SMTP server, select ‘Enable’ or SMTP connection may fail; select ‘Disable’ if your SMTP server do

Rear - Network Camera Tripod Connector Connects to any standard tripod / camera wall holder. WPS/Reset button Press and release this button

3.10 System Settings Camera information allows you to set the name and administrator’s password of this camera, change the time settings, and turn

NTP Server Please input the IP address or host name of NTP server here. You can use default value ‘pool.ntp.org’, or ask your ISP for the IP address

3.12 Firmware Update The descriptions of every setting in this menu will be given below: Item Description Upgrade Firmware If you downloaded lates

4. Appendix 4.1 Specification  Camera/Image:  Dual Mode: MPEG4 and Motion-JPEG Image Video  Multiple Profile: Output M-JPEG and MPEG4 at

4.2 Troubleshooting If the IP camera is not working properly, before you contact the dealer of purchase for help, please check the troubleshooting

address is correct, please contact dealer of purchase for help). Image is fuzzy a. Use a soft cloth to clean the lens on the camera. You can use clot

How can I find the IP address from the IP cam? Please open the utility and press the following button. And you will see the IP address from the cam

Select ‘Internet Protocol (TCP/IP)’, then click ‘Properties’. In ‘IP address’ field, please enter any IP address that begins with ‘192.168.0’, an

If you've changed the IP address of this IP camera and you forget it, there are 3 ways you can recover it:

Description for LED indicators LED Power Link Status Remark Booting Flash Flash System Ready On Off LAN connected On On Data

Package Contents The following items should be included: If any of these items are damaged or missing, please contact your dealer immediately. 1.

Camera Installation Please follow the following instructions to configure your IP camera:  Unpack the product package and check if anything is mi

2. Using the surveillance software When the CDROM is inserted into the CDROM player, the CD-Menu will automatically start. (If it isn&apos